×
close
click to zoom in

ACDelco 17699R | Rear Drum Brake Shoe

(No reviews yet) Write a Review
$161.09
Part Number
ACD17699R
UPC:
00021625955803
Condition:
New
5 customers are viewing this product
Riveted Rear Drum Brake Shoe Set

BRAND: ACDelco

FEATURES:

  • Abs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake Rotor;Brake Shoe;brakes care;Caliper;Drums;Durastop Brake Pads;Durastop Brake Parts;Durastop Ceramic Brake Pads;Low Voc Brake Parts Cleaner 15oz;Low Voc Brake Parts Cleaner 16oz;luxury hybrid brake pads;oem Brakes;Pads And Shoes;Rotor;Silicone Brake Lubricant
  • Rear Brake Shoe Set

SPECIFICS:

ACD_RemanDesNo
Brake Shoe Width4.02
Drum Inside Diameter12.60
FAQ - A3Are these brake parts durable?
FAQ - A4Do I have to replace all my brake parts when replacing my brake shoes?
FAQ - A5Does ACDelco offer other grades of brake shoes?
FAQ - A6Do I have to replace my brake shoes after a certain amount of time?
FAQ - Q4Yes, ACDelco Professional Brake Shoes come with a limited lifetime warranty.
FAQ - Q5No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Q6Yes, ACDelco also offers GM OE brake pads and Advantage Brake Shoes.
FAQ - Q7No, but it is a good idea to inspect your brake shoes at each tire rotation.
Features & Benefits - B1Quality validated for proper metallurgy and correct brake plate thickness
Features & Benefits - B2Non-directional brake surface finish for consistent braking
Features & Benefits - B3All shoes are machined for correct shoe-to-drum contact
Features & Benefits - B4Highest shear strength for the best bond integrity
Features & Benefits - B5Contour or cam ground to eliminate chatter and rear wheel lockup
Features & Benefits - B6Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - B7Premium aftermarket replacement part
Features & Benefits - B8Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Friction Material AttachmentRiveted
Good Maintenance Practices - S1 B5The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - S1 B6Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - S1 B7Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - S1 B8Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - S1 B9Check the thickness of your brake pads.
Good Maintenance Practices - S2 B5The following should be conducted by a qualified technician:
Good Maintenance Practices - S2 B6Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - S2 B7Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - S2 B8Inspection of wheel bearings and grease seals.
Good Maintenance Practices - S2 B9Parking brake adjustments (as needed).
Height7.12
Keyword SearchACDelco; ACDelco Riveted Drum Brake Shoe; ACDelco Professional Brake Shoe; ACDelco Professional Riveted Brake Shoe; ACDelco Professional Riveted Brake Shoe; ACDelco Professional Riveted Drum Brake Shoe; Brake; Brakes; Braking; Brake Parts; Brake Shoes; Drum Brake Shoe; Brake Shoe; Drum Brake Shoe; Riveted Brake Shoe; Riveted Drum Brake Shoe; Professional Brake Shoe; Professional Brake Shoe; Professional Riveted Brake Shoe; Professional Riveted Drum Brake Shoe; Professional Riveted Brake Shoe; Professional Riveted Drum Brake Shoe; SHOE,FRT BRK; SHOE,RR BRK; SHOE KIT,RR BRK
Length15.5
Mkt_BrandQual_NameRiveted
Mkt_State_Warranty_CA24 Months/40,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Mounting Hardware IncludedNo
Product DescriptionACDelco (Professional) Gold Riveted Brake Shoes are the high quality alternative to Original Equipment (OE) parts. Engineered with a premium dipped coating to help resist corrosion and premature wear, they provide superior performance. These riveted brakes deliver the highest possible shear strength while reducing noise and vibration. For GM vehicle application, the chamfer angle and vane configuration follow the OE design. Also, no machining is required. ACDelco Professional Riveted Brake Shoes are ready to be installed right out of the box. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B5Brake shoe signs of wear include:
Signs of Wear & Troubleshooting - S1 B6Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - S1 B7Squealing or grinding noises.
Signs of Wear & Troubleshooting - S1 B8Low brake pedal height.
Signs of Wear & Troubleshooting - S1 B9Vehicle pulls to the left or right when brakes are applied.
Vintage_Part_IndicatorN
Weight20.1
Width13.12

DOWNLOADS:

APPLICATIONS:

  • 2017-2020 Chevrolet LCF 4500HD - Position: Rear
    • w/ 14,500 lb. GVW
  • 2011-2012 Isuzu NPR - Position: Rear
    • w/ 320mm X 100mm Brakes
  • 1989-1994 Isuzu FTR - Position: Front
    • w/ Air Over Hydraulic Brake System
  • 2000-2005 GMC W4500 Forward - Position: Rear
    • with 12-5/8in x 4in Brakes
  • 2016-2018 Chevrolet LCF 3500 - Position: Rear
    • w/ 12,000 lb. GVW
  • 1989-1994 Isuzu FTR - Position: Rear
  • 2016-2018 Isuzu NPR - Position: Rear
    • w/ 320mm X 100mm Brakes
  • 2010-2018 Isuzu NPR-HD - Position: Rear
  • 2000-2005 GMC W3500 Forward - Position: Rear
    • with 12-5/8in x 4in Brakes
  • 2016-2017 Chevrolet LCF 3500HD - Position: Rear
    • w/ 13,000 lb. GVW
  • 2000-2005 Chevrolet W4500 Tiltmaster - Position: Rear
    • with 12-5/8in x 4in Brakes
  • 1999-2009 Isuzu NPR-HD - Position: Rear
    • 320mm X 100mm Rear Brakes
  • 2004-2004 Chevrolet W5500 Tiltmaster - Position: Rear
    • with 12-5/8in x 4in Brakes
  • 1988-1988 Isuzu FTR - Position: Front
  • 1987-2009 Isuzu NPR - Position: Rear
    • w/ 320mm X 100mm Brakes
  • 1999-2005 Chevrolet W3500 Tiltmaster - Position: Rear
    • with 12-5/8in x 4in Brakes
  • 2004-2004 Chevrolet W5500HD Tiltmaster - Position: Rear
    • with 12-5/8in x 4in Brakes
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Rear Brake Shoe Set
Product Description:
Riveted Rear Drum Brake Shoe Set
Friction Material Attachment:
Riveted
Mounting Hardware Included:
No
Programming Required:
No
Brake Shoe Width (Inch):
4.02
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Non-directional brake surface finish for consistent braking
Features & Benefits - Bullet 4:
Highest shear strength for the best bond integrity
Features & Benefits - Bullet 3:
All shoes are machined for correct shoe-to-drum contact
Features & Benefits - Bullet 1:
Quality validated for proper metallurgy and correct brake plate thickness
Weight (lb) (Pound):
20.1
Height (in) (Inch):
7.12
Width (in) (Inch):
13.12
Length (in) (Inch):
15.5
Signs of Wear & Troubleshooting - Section 1 - Bull:
Squealing or grinding noises.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Low brake pedal height.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
FAQ - Question 4:
Do I have to replace my brake shoes after a certain amount of time?
Life Cycle Status:
Announced
FAQ - Answer 2:
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 3:
Does ACDelco offer other grades of brake shoes?
Item Level GTIN:
00021625955803
FAQ - Question 1:
Are these brake parts durable?
Features & Benefits - Bullet 7:
Premium aftermarket replacement part
Features & Benefits - Bullet 6:
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
FAQ - Question 2:
Do I have to replace all my brake parts when replacing my brake shoes?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake shoe signs of wear include:
FAQ - Answer 1:
Yes, ACDelco Professional Brake Shoes come with a limited lifetime warranty.
FAQ - Answer 4:
No, but it is a good idea to inspect your brake shoes at each tire rotation.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, ACDelco also offers GM OE brake pads and Advantage Brake Shoes.
Features & Benefits - Bullet 8:
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Drum Inside Diameter (in) (Inch):
12.6
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
20.10
Height - Each (Inch):
07.12
Length - Each (Inch):
15.50
Width - Each (Inch):
13.12



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top