×
close
click to zoom in

ACDelco 20189S | Upper Radiator Coolant Hose

(No reviews yet) Write a Review
$17.00
Part Number
ACD20189S
UPC:
00021625262963
Condition:
New
5 customers are viewing this product
Molded Radiator Hose

BRAND: ACDelco

FEATURES:

  • A/C Compressor Belt;Air Brake Hose;Air Intake Duct Drain Hose;Alternator Decoupler Pulley;Coolant Hose;Drive Belt;Elbow Air Vent Hose;Flanged Idler Pulley;Fuel Carburetion Hose;Fuel Line/PCV/EEC Hose;Heater Hose;Idler Pulley;Lawn and Garden V-Belt;Power Steering Pump Belt;Radiator Hose;Snowmobile V-Belt;Supercharger Belt;Timing Belt;Turbocharger Hose;V-Ribbed Serpentine Belt

SPECIFICS:

ACD_RemanDesNo
AltPA_2008_mm32.0
AltPA_2009_mm32.0
AltPA_2035_mm272
Branch Quantity0
ColorBlack
Contains SpringNO
End 1 Inside Diameter1.25
End 2 Inside Diameter1.25
FAQ - A1Yes, make sure the hose clamps are screwed on tightly when installing.
FAQ - A2Yes - when there's water in the hose. That's why it's important to follow the vehicle manufacturer's recommendation on the use of engine coolant.
FAQ - A3No, use the hose in the way it's listed in the ACDelco belts and hoses catalog.
FAQ - A4Yes, this requires inspection, though. When the engine is cool, squeeze the hoses with your thumb and forefinger near the clamps. Feel for soft or mushy spots. A good hose will have a firm yet pliant feel. Also, Inspect for cracks, nicks, bulges (usually while hot), or a collapsed section in the hose and oil contamination, or fraying near the connection points.
FAQ - A5No
FAQ - A6No
FAQ - Q1Can an automotive hose detach during use?
FAQ - Q2Can an automotive hose freeze in the winter?
FAQ - Q3Can I use the same automotive hose for multiple uses?
FAQ - Q4Will I know when it is time to replace an automotive hose?
FAQ - Q5Are there steps I can take to ensure a longer automotive hose life?
FAQ - Q6Will a worn automotive hose affect gas mileage?
Features & Benefits - B1Has a heat and ozone resistant cover to increase the life of the hose
Features & Benefits - B2Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Features & Benefits - B3Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Features & Benefits - B4Installs without buckling, bending out of shape, or straining at the connection for easy installation
Features & Benefits - B5Inside diameters ranges from 1/4 in to 1 in to fit different types of vehicles
Good Maintenance Practices - S1 B1Examine hoses every 12 months. Look for leaks, cracks, or rot. Replace when showing signs of wear.
Good Maintenance Practices - S1 B2Tighten any loose clamps. Replace clamps when replacing hoses.
Good Maintenance Practices - S1 B3Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
Good Maintenance Practices - S1 B4Periodically remove bugs, leaves, and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
Good Maintenance Practices - S1 B5Though electrochemical degradation occurs from the inside out, you can feel for voids, cracks, or weak spots. Squeeze the hose with your thumb and two or three fingers. If you're not sure, remove the hose and check it visually.
Hose ShapeMOLDED_ASSEMBLY
Marketing Statement - Product LineBuilt to meet the latest demands, ACDelco's Belts and Hoses line includes automotive belts and hoses, tensioners, pulleys, and kits. ACDelco offers a wide variety of Professional premium, aftermarket parts, and a select offering of GM Original Equipment Belts that fit a variety of vehicles on the road today.
Marketing Statement - Sub BrandWhen it comes to replacing your Belts, ACDelco offers a full line of Professional, premium aftermarket Belt products. To help make part replacement simple and precise, ACDelco also offers pulleys, tensioners, and kits. ACDelco Professional, premium aftermarket belts fit both GM and Non GM vehicles.
MaterialReinforced Rubber
Measurements1 1/4 in x 10 11/16 in
Mkt_BrandQual_NameMolded
Mkt_State_Warranty_CALimited Lifetime Warranty as long as original purchaser still owns vehicle (Parts Only).
Mkt_State_Warranty_USLimited Lifetime as long as original purchaser owns vehicle. (Parts Only)
Product DescriptionACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today's smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet your expectations for fit, form, and function.
Programming RequiredNO
Protective Sleeve AttachedNO
Signs of Wear & Troubleshooting - S1 B1Signs of electrochemical degradation include voids, cracks, or weak spots on the inside of the hose.
Signs of Wear & Troubleshooting - S1 B2Signs of internal heat damage include slight swelling of the hose cover.
Signs of Wear & Troubleshooting - S1 B3Signs of external heat damage include hardening or cracking of the hose cover.
Signs of Wear & Troubleshooting - S1 B4Other signs of wear include oil damage, abrasion damage, brittleness, lack of heat/cooling within the cabin, ozone damage, and leakage of the hose.
Usage ChartPL35_UC_AutoHoses.jpg
Vintage_Part_IndicatorN

DOWNLOADS:

APPLICATIONS:

  • 2004-2008 Suzuki Swift+ - Position: Upper
    • W/A.C.; Cut to fit
  • 1999-2002 Daewoo Lanos - Position: Upper
    • W/A.C.; Cut to fit
  • 1999-2001 Volkswagen Jetta - Position: Upper - Tee-1 To Thermostat
    • W/O Quick Connect Fitting; Cut to fit
  • 1991-1991 Volkswagen Passat - Position: Lower
    • W/O A.C.; W/Std. Cool.
  • 2005-2008 Pontiac Wave - Position: Upper
    • W/A.C.; Cut to fit
  • 1992-1992 Volkswagen Jetta - Position: Lower
    • W/O A.C.
  • 1998-2000 Audi A3 - Position: Upper - Tee To Thermostat
    • W/A.C.; Cut to fit
  • 1999-2004 Volkswagen Golf - Position: Upper - Tee-1 To Thermostat
    • W/O Quick Connect Fitting; Cut to fit
  • 1985-1992 Volkswagen Golf - Position: Lower
    • W/O A.C.; W/Std. Cool.
  • 2007-2008 Pontiac G3 - Position: Upper
    • W/A.C.; Cut to fit
  • 2005-2007 Pontiac Wave5 - Position: Upper
    • W/A.C.; Cut to fit
  • 1992-1993 Volkswagen Passat - Position: Lower - Pipe To Radiator
  • 2004-2008 Chevrolet Aveo - Position: Upper
    • W/A.C.; Cut to fit
  • 2006-2008 Chevrolet Aveo5 - Position: Upper
    • W/A.C.; Cut to fit
  • 2009-2016 Chevrolet Aveo - Position: Upper
  • 1985-1992 Volkswagen Jetta - Position: Lower
    • W/O A.C.; W/Std. Cool.
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Molded Radiator Hose
Material:
Reinforced Rubber
Programming Required:
No
Color:
Black
Branch Quantity:
0
End 2 Inside Diameter (Inch):
1.25
Contains Spring:
No
End 1 Inside Diameter (Inch):
1.25
Protective Sleeve Attached:
No
Hose Shape:
Molded Assembly
Measurements:
1 1/4 in x 10 11/16
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Features & Benefits - Bullet 4:
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Features & Benefits - Bullet 3:
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Features & Benefits - Bullet 1:
Has a heat and ozone resistant cover to increase the life of the hose
Signs of Wear & Troubleshooting - Section 1 - Bull:
Other signs of wear include oil damage, abrasion damage, brittleness, lack of heat/cooling within the cabin, ozone damage, and leakage of the hose.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of internal heat damage include slight swelling of the hose cover.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of external heat damage include hardening or cracking of the hose cover.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of electrochemical degradation include voids, cracks, or weak spots on the inside of the hose.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 4:
Will I know when it is time to replace an automotive hose?
Item Level GTIN:
00021625262963
FAQ - Answer 2:
Yes - when there's water in the hose. That's why it's important to follow the vehicle manufacturer's recommendation on the use of engine coolant.
FAQ - Question 3:
Can I use the same automotive hose for multiple uses?
FAQ - Question 1:
Can an automotive hose detach during use?
FAQ - Answer 5:
No
FAQ - Question 2:
Can an automotive hose freeze in the winter?
Features & Benefits - Bullet 5:
Inside diameters ranges from 1/4 in to 1 in to fit different types of vehicles
FAQ - Question 6:
Will a worn automotive hose affect gas mileage?
FAQ - Question 5:
Are there steps I can take to ensure a longer automotive hose life?
FAQ - Answer 1:
Yes, make sure the hose clamps are screwed on tightly when installing.
Good Maintenance Practices - Section 1 - Bullet 1:
Examine hoses every 12 months. Look for leaks, cracks, or rot. Replace when showing signs of wear.
Good Maintenance Practices - Section 1 - Bullet 2:
Tighten any loose clamps. Replace clamps when replacing hoses.
Good Maintenance Practices - Section 1 - Bullet 3:
Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
Good Maintenance Practices - Section 1 - Bullet 4:
Periodically remove bugs, leaves, and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
FAQ - Answer 3:
No, use the hose in the way it's listed in the ACDelco belts and hoses catalog.
Good Maintenance Practices - Section 1 - Bullet 5:
Though electrochemical degradation occurs from the inside out, you can feel for voids, cracks, or weak spots. Squeeze the hose with your thumb and two or three fingers. If you're not sure, remove the hose and check it visually.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
FAQ - Answer 6:
No
End 2 Inside Diameter (Millimeter):
32.0
End 1 Inside Diameter (Millimeter):
32.0
Centerline Length (Millimeter):
272
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.65
Height - Each (Inch):
02.50
Length - Each (Inch):
08.60
Width - Each (Inch):
02.50



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top