×
close
click to zoom in

ACDelco 337-1172 | Starter Motor

(No reviews yet) Write a Review
$159.99
Part Number
ACD337-1172
UPC:
808709411314
Condition:
New
5 customers are viewing this product

ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability even in the toughest conditions. Starters have solenoids that are computer tested for contact life, coil balance, and pull strength, drive gears/clutches assembled under tight specifications for even greater peace of mind. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • All components are 100% NEW to provide improved performance
  • All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit
  • Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind
  • Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle
  • Key components are greased to ensure long term reliability in harsh conditions
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality
  • Nissan;Suzuki
  • Premium aftermarket replacement part
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional

SPECIFICS:

FamilyPermanent Magnet Planetary Gear Reduction
FAQ - Answer 1Yes. It is included where the design of the starter requires a solenoid.
FAQ - Answer 2Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Answer 3No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel.
FAQ - Question 1Is the solenoid included?
FAQ - Question 2Can I be assured that the unit will last, especially in extreme weather?
FAQ - Question 3Do I always need a starter shim?
Good Maintenance Practices - Section 1 - Bullet 1Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 2Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - Section 1 - Bullet 3Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 4It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Height (in)5.8
Length (in)12.7
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mounting Bolt Hole Quantity2
Mounting Hardware IncludedNo
Mounting Shims IncludedNo
Mounting TypeFlange
Nose Cone TypeClosed Nose
Programming RequiredNo
Re Clockable FlangeYes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Clunking/grinding noise when starting engine
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Starter will not engage
Signs of Wear & Troubleshooting - Section 1 - HeaderIndicators that there could be a problem with your vehicle's starter are:
Signs of Wear & Troubleshooting - Section 2 - Bullet 1Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bullet 2Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Bullet 3Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bullet 4Damage to flywheel
Signs of Wear & Troubleshooting - Section 2 - HeaderOther vehicle parts that might cause related starter problems include:
Solenoid AttachedYes
Starter RotationClockwise
Tooth Quantity13
Voltage12 VDC
Weight (lb)8.62
Width (in)7.2

DOWNLOADS:

APPLICATIONS:

  • 2017-2019 Nissan NV3500
  • 2012-2015 Nissan NV3500
  • 2012-2019 Nissan NV1500
  • 2005-2019 Nissan Frontier
  • 2005-2015 Nissan Xterra
  • 2005-2012 Nissan Pathfinder
  • 2012-2019 Nissan NV2500
  • 2009-2012 Suzuki Equator

Product type:
Aftermarket
Brand Description:
Starter
Mounting Hardware Included:
No
Programming Required:
No
Mounting Type:
Flange
Tooth Quantity:
13
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
All components are 100% NEW to provide improved performance
Features & Benefits - Bullet 4:
Key components are greased to ensure long term reliability in harsh conditions
Features & Benefits - Bullet 3:
Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle
Features & Benefits - Bullet 1:
NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality
Weight (lb) (Pound):
8.62
Height (in) (Inch):
5.8
Width (in) (Inch):
7.2
Length (in) (Inch):
12.7
Signs of Wear & Troubleshooting - Section 1 - Bull:
Starter will not engage
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bull:
Clunking/grinding noise when starting engine
FAQ - Answer 2:
Yes. These starters are designed to withstand a wide range of weather conditions.
Life Cycle Status:
Announced
FAQ - Question 3:
Do I always need a starter shim?
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 1:
Is the solenoid included?
Item Level GTIN:
00808709411314
Features & Benefits - Bullet 7:
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - Bullet 6:
Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind
FAQ - Question 2:
Can I be assured that the unit will last, especially in extreme weather?
Signs of Wear & Troubleshooting - Section 1 - Head:
Indicators that there could be a problem with your vehicle's starter are:
Features & Benefits - Bullet 5:
All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit
FAQ - Answer 1:
Yes. It is included where the design of the starter requires a solenoid.
Good Maintenance Practices - Section 1 - Bullet 1:
Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 2:
Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - Section 1 - Bullet 3:
Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 4:
It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
FAQ - Answer 3:
No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel.
Features & Benefits - Bullet 8:
Premium aftermarket replacement part
Features & Benefits - Bullet 9:
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Signs of Wear & Troubleshooting - Section 2 - Bull:
Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bull:
Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Bull:
Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bull:
Damage to flywheel
Signs of Wear & Troubleshooting - Section 2 - Head:
Other vehicle parts that might cause related starter problems include:
Voltage:
12 VDC
Mounting Bolt Hole Quantity:
2
Solenoid Attached:
Yes
Family:
Permanent Magnet Planetary Gear Reduction
Power Rating (Kilowatts):
1.80
Power Rating (Horsepower):
1.8
Mounting Flange to Pinion End at Rest (Millimeter):
22.0
Starter Rotation:
Clockwise
Nose Cone Type:
Closed Nose
Mounting Shims Included:
No
Re Clockable Flange:
Yes
Mounting Flange to Pinion End at Rest (Inch):
0.87
Mounting Flange to End of Case (Inch):
7.52
Mounting Flange to End of Case (Millimeter):
191
Country of Origin:
Japan
Weight - Each (Gross Pounds):
08.62
Height - Each (Inch):
05.80
Length - Each (Inch):
12.70
Width - Each (Inch):
07.20



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top