×
close

ACDelco 20-17 | Front Wheel Bearing and Hub Assembly

(No reviews yet) Write a Review
$219.87
Part Number
ACD20-17
UPC:
00021625545691
Condition:
New
5 customers are viewing this product
Rear Wheel Hub and Bearing Assembly with Wheel Speed Sensor and Wheel Studs

BRAND: ACDelco

FEATURES:

  • Alternator Drive End Bearing; Axle Shaft Seal; Bearing; Crankshaft Oil Seal; Differential Bearing; Camshaft Cover Seal; Axle Shaft Outer Bearing; Engine Cover Seal; Drive Axle Bearing; Strut Mount Bearing; Wheel Bearing; Wheel Hub; Main Shaft Bearing; PCV Valve Seal; Axle Shaft Bearing; Wheel Bearing and Hub Assembly; Reverse Gear Needle Bearing; Steering Gear Housing Bearing

SPECIFICS:

ACD_RemanDesNo
AltPA_143_mm115.00
AltPA_1961_mm12.00
AltPA_1961_thread_pitchM12x1.50
AltPA_1962_mm70.150
AltPA_1963_mm70.65
AltPA_1966_mm91.25
AltPA_4585_mm12.00
AltPA_565_mm42.20
AltPA_675_mm145.50
Anti Lock Braking SystemYes
Anti Lock Braking System TypeSensor
Brake Pilot Diameter2.782
Connector GenderFemale
Connector Quantity1
Connector Terminal Quantity2
FAQ - A1Yes. The nut should be torqued to the specifications found in the vehicle's service manual.
FAQ - A2Yes. It is normal for the bearing to have some movement inside the hub assembly; this movement is controlled to a specification.
FAQ - A3Yes, in some cases replacement hub assemblies come with ABS cables because most vehicles are now equipped with ABS. For non-ABS vehicles the cable can be cut off before hub installation.
FAQ - Q1Are there specifications I should check to see how tight the center hub bearing attachment nut should be?
FAQ - Q2Is it normal for the bearing to have back-and-forth movement inside the hub assembly?
FAQ - Q3Can I use a replacement hub assembly that comes with an ABS cable when my vehicle does not have ABS?
Features & Benefits - B1Supports the vehicle while allowing the wheel to rotate
Features & Benefits - B2Maximum lateral stiffness for optimum ride, handling, and driving dynamics
Features & Benefits - B3GM OE parts are built to help withstand potholes and designed to maximize seal life
Features & Benefits - B4GM OE bearing designs are dimensionally optimized to work with their mating parts
Features & Benefits - B5GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - B6Offering the quality, reliability, and durability of GM OE
Features & Benefits - B7Manufactured to GM OE specification for fit, form, and function
Flange Bolt Hole Diameter0.472
Flange Bolt Hole Quantity3
Flange Bolts IncludedNo
Flange Diameter5.7280
Flange Offset1.661
Flange ShapeTriangular
Good Maintenance Practices - S1 B1Keep wheel lug nuts at proper torque and do not overtighten center hub bearing to constant velocity shaft nut.
Good Maintenance Practices - S1 B2Follow the manufacturers recommended torque specification.
Height6.5
Hub Pilot Diameter3.593
Keyword SearchOriginal Equipment; OE; OES; ACDelco; Automotive Parts; Auto Parts; GM; BEARING,FRT WHL; BEARING,RR WHL; HUB KIT,FRT WHL; HUB KIT,RR WHL; HUB,FRT WHL; HUB,FRT WHL (W/WHL SPD SEN); HUB,FRT WHL(W/BRG & WHL SPD SEN); HUB,FRT WHL(W/BRG); HUB,RR WHL; HUB,RR WHL (R/AXL FRT U); HUB,RR WHL (R/AXL FRT U) (RH PROC); HUB,RR WHL (R/AXL RR U); HUB,RR WHL (R/AXL RR U)(RH PROC); HUB,RR WHL(W/ BRG); HUB,RR WHL(W/BRG & WHL SPD SEN); HUB,RR WHL(W/WHL SPD SEN); BEARING,FRT WHL; BEARING,RR WHL; HUB,RR WHL; HUB,RR WHL(W/ BRG)
Length6.8
Marketing Statement - Product LineACDelco Bearings and Oil Seals include Original Equipment and Advantage lines, along with a select offering of Professional, premium aftermarket seals that fit a wide range of vehicles on the road today. Whether it be a taper, roller, clutch release, or wheel hub bearing, ACDelco can provide the part you need. The same holds true for oil seals, ACDelco offers a comprehensive range of oil seals to fit most repair jobs you're working on. When you're in need of a bearing or oil seal, look to ACDelco for qualty, value, and guaranteed performance.
Marketing Statement - Sub BrandGet the GM quality you know and trust with ACDelco GM Original Equipment Bearings and Oil Seals. Stay with the brand of parts your vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Bearings and Oil Seals are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. ACDelco offers a variety of bearings and seals for your GM vehicle, such as wheel hub bearings, generator/alternator bearings, front and rear wheel seals, rear axle seals, etc. When smooth, efficient performance is critical, choose ACDelco.
Mkt_State_Warranty_CA36 Months/60,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_USLimited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
Product DescriptionACDelco GM Original Equipment Wheel Bearing and Hub Assembly supports the vehicle while allowing the wheel to rotate, and are GM-recommended replacements for your vehicle's original components. This original equipment wheel bearing and hub assembly has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B1Grinding or humming noise from hub assembly maybe more noticeable while turning
Signs of Wear & Troubleshooting - S1 B2Tire and wheel vibration
Signs of Wear & Troubleshooting - S1 B3Excessive play at tire and wheel
Signs of Wear & Troubleshooting - S1 B4Wheel hot to the touch
Signs of Wear & Troubleshooting - S1 HSigns of wear for wheel bearing and hub assemblies include but are not limited to:
Spline Quantity33
Terminal GenderMale
Vintage_Part_IndicatorN
Weight8.06
Wheel Pilot Diameter2.7620
Wheel Stud Quantity5
Wheel Stud Size0.472
Wheel Studs IncludedYes
Width6.7

DOWNLOADS:

APPLICATIONS:

  • 2001-2001 Buick Park Avenue - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 13582664
  • 1998-2000 Cadillac Seville - Position: Front
    • EUROPEAN BRK(JE1)(EXPORT) INCLS BEARING, MTG BOLTS, SENSOR
  • 1997-2000 Buick Park Avenue - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 2002-2004 Chevrolet Venture - Position: Rear
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Chevrolet Venture - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 1999-2000 Pontiac Montana - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Buick LeSabre - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 13582664 OR FW128
  • 1997-2000 Cadillac DeVille - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 1997-2000 Cadillac Eldorado - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 2000-2000 Pontiac Bonneville - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 1997-2000 Buick Regal - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Cadillac Seville - Position: Front
    • EUROPEAN BRK(JE1)(EXPORT) INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 2000-2000 Chevrolet Monte Carlo - Position: Front
    • Light Duty Brakes INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Oldsmobile Silhouette - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 2001-2001 Chevrolet Monte Carlo - Position: Front
    • Light Duty Brakes LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 2001-2001 Cadillac Seville - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 1997-2000 Buick Century - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Buick Regal - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 2001-2001 Pontiac Grand Prix - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 2000-2001 Chevrolet Impala - Position: Front
  • 2002-2004 Oldsmobile Silhouette - Position: Rear
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 1997-2000 Cadillac Seville - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 1997-1999 Oldsmobile Aurora - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 1997-2000 Pontiac Grand Prix - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Chevrolet Impala - Position: Front
    • Light Duty Brakes LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 2001-2001 Pontiac Bonneville - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 13582664 OR FW128
  • 1997-2000 Chevrolet Venture - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Cadillac Eldorado - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 2001-2001 Pontiac Montana - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 1998-2000 Oldsmobile Intrigue - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Oldsmobile Intrigue - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 1997-1998 Pontiac Trans Sport - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 2000-2000 Buick LeSabre - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 2000-2000 Chevrolet Impala - Position: Front
    • Heavy Duty Brakes INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Buick Century - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 1997-1999 Buick Riviera - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 2002-2006 Buick Rendezvous - Position: Rear
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 1997-2000 Oldsmobile Silhouette - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
  • 2001-2001 Oldsmobile Aurora - Position: Front
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 13582664 OR FW128
  • 2000-2000 Chevrolet Monte Carlo - Position: Front
  • 2001-2001 Cadillac DeVille - Position: Front
    • INCLS BEARING, MTG BOLTS, SENSOR 1st Design WITH STAINLESS STL SENSOR WIRE SPRING CLIP, FOR 2ND DES SEE 19259596 OR FW128
  • 2001-2005 Pontiac Aztek - Position: Rear
    • INCLS BEARING, MTG BOLTS, SENSOR
  • 2002-2004 Pontiac Montana - Position: Rear
    • LH AND RH, INCLS BEARING, MTG BOLTS, SENSOR
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Rear Wheel Hub and Bearing Assembly with Wheel Speed Sensor and Wheel Studs
Terminal Gender:
Male
Connector Gender:
Female
Connector Quantity:
1
Programming Required:
No
Flange Bolts Included:
No
Flange Bolt Hole Quantity:
3
Anti Lock Braking System:
Yes
Anti Lock Braking System Type:
Sensor
Flange Diameter (Inch):
5.728
Wheel Stud Quantity:
5
Flange Offset (Inch):
1.661
Brake Pilot Diameter (Inch):
2.782
Wheel Studs Included:
Yes
Flange Shape:
Triangular
Wheel Pilot Diameter (Inch):
2.762
Wheel Stud Size (Inch):
0.472
Hub Pilot Diameter (Inch):
3.593
Flange Bolt Hole Diameter (Inch):
0.472
Spline Quantity:
33
Life Cycle Status:
Superseded
Connector Terminal Quantity:
2
Life Cycle Status Description:
Superseded - Part is being replaced by the surviving part number.
Hazardous Material:
No
Item Level GTIN:
00021625545691
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Maximum lateral stiffness for optimum ride, handling, and driving dynamics
Features & Benefits - Bullet 4:
GM OE bearing designs are dimensionally optimized to work with their mating parts
Features & Benefits - Bullet 3:
GM OE parts are built to help withstand potholes and designed to maximize seal life
Features & Benefits - Bullet 1:
Supports the vehicle while allowing the wheel to rotate
Weight (lb) (Pound):
8.06
Height (in) (Inch):
6.5
Width (in) (Inch):
6.7
Length (in) (Inch):
6.8
Signs of Wear & Troubleshooting - Section 1 - Bull:
Grinding or humming noise from hub assembly maybe more noticeable while turning
Signs of Wear & Troubleshooting - Section 1 - Bull:
Excessive play at tire and wheel
Signs of Wear & Troubleshooting - Section 1 - Bull:
Wheel hot to the touch
Signs of Wear & Troubleshooting - Section 1 - Bull:
Tire and wheel vibration
FAQ - Answer 2:
Yes. It is normal for the bearing to have some movement inside the hub assembly; this movement is controlled to a specification.
FAQ - Question 3:
Can I use a replacement hub assembly that comes with an ABS cable when my vehicle does not have ABS?
FAQ - Question 1:
Are there specifications I should check to see how tight the center hub bearing attachment nut should be?
Features & Benefits - Bullet 7:
Manufactured to GM OE specification for fit, form, and function
Features & Benefits - Bullet 6:
Offering the quality, reliability, and durability of GM OE
FAQ - Question 2:
Is it normal for the bearing to have back-and-forth movement inside the hub assembly?
Signs of Wear & Troubleshooting - Section 1 - Head:
Signs of wear for wheel bearing and hub assemblies include but are not limited to:
Features & Benefits - Bullet 5:
GM-recommended replacement part for your GM vehicle's original factory component
FAQ - Answer 1:
Yes. The nut should be torqued to the specifications found in the vehicle's service manual.
Good Maintenance Practices - Section 1 - Bullet 1:
Keep wheel lug nuts at proper torque and do not overtighten center hub bearing to constant velocity shaft nut.
Good Maintenance Practices - Section 1 - Bullet 2:
Follow the manufacturers recommended torque specification.
FAQ - Answer 3:
Yes, in some cases replacement hub assemblies come with ABS cables because most vehicles are now equipped with ABS. For non-ABS vehicles the cable can be cut off before hub installation.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Bolt Circle Diameter (in) (Inch):
4.528
Bolt Circle Diameter (mm) (Millimeter):
115
Flange Bolt Hole Diameter (Millimeter):
12
Wheel Stud Size (Millimeter):
12
Wheel Pilot Diameter (Millimeter):
70.15
Brake Pilot Diameter (Millimeter):
70.65
Hub Pilot Diameter (Millimeter):
91.25
Flange Offset (Millimeter):
42.2
Flange Diameter (Millimeter):
145.5
Country of Origin:
United States
Weight - Each (Gross Pounds):
08.06
Height - Each (Inch):
06.50
Length - Each (Inch):
06.80
Width - Each (Inch):
06.70



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top