×
close
click to zoom in

ACDelco 336-1904A | Starter Motor

(No reviews yet) Write a Review
$98.99
Part Number
ACD336-1904A
UPC:
707773623398
Condition:
New
5 customers are viewing this product

ACDelco Gold (Professional) Remanufactured Starters are the high quality alternative to Original Equipment (OE) parts. These starters have new bronze sintered and oil-impregnated bushings. Solenoid contacts are new with copper terminals and plated hardware. Remanufacturing starters is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Buick;Cadillac;Chevrolet;Oldsmobile;Pontiac
  • Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications
  • Remanufactured using consistent quality processes; not just rebuilt
  • Solenoid contacts are new with copper terminals and plated hardware
  • Starters have new bronze sintered and oil-impregnated armature bushings

SPECIFICS:

Case GroundingGrounded Case
FamilyDelco
FAQ - Answer 3Is the solenoid included?
FAQ - Answer 4Can I be assured that the unit will last, especially in extreme weather?
FAQ - Answer 5Do I always need a starter shim?
FAQ - Question 4Yes. It is included where the design of the starter requires a solenoid.
FAQ - Question 5Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Question 6No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive make appropriate contact with the flywheel.
Good Maintenance Practices - Section 1 - Bullet 6Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 7Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - Section 1 - Bullet 8Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 9It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mounting Bolt Hole Quantity2
Mounting Hardware IncludedNo
Mounting Shims IncludedNo
Nose Cone MaterialAluminum
Re Clockable FlangeNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Indicators that there could be a problem with your vehicle's starter are:
Signs of Wear & Troubleshooting - Section 1 - Bullet 6Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bullet 7Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bullet 8Clunking/grinding noise when starting engine
Signs of Wear & Troubleshooting - Section 1 - Bullet 9Starter will not engage
Signs of Wear & Troubleshooting - Section 2 - Bullet 5Other vehicle parts that might cause related starter problems include:
Signs of Wear & Troubleshooting - Section 2 - Bullet 6Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bullet 7Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Bullet 8Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bullet 9Damage to flywheel
Solenoid AttachedYes
Starter RotationClockwise
Tooth Quantity9
TypeDirect Drive
Voltage12 VDC

Remanufactured Family DE-SD260 Unit MFR DE kW Rating 1.6 Drive DD

DOWNLOADS:

APPLICATIONS:

  • 1991-1992 Chevrolet Commercial Chassis
  • 1991-1992 Cadillac Brougham
  • 1991-1991 Buick Commercial Chassis
  • 1991-1992 Pontiac Firebird
  • 1991-1991 Buick Roadmaster
  • 1991-1992 Chevrolet Camaro
  • 1991-1995 Chevrolet Caprice
  • 1991-1992 Oldsmobile Custom Cruiser

Product type:
Aftermarket
Product Description:
Starter
Mounting Hardware Included:
No
Tooth Quantity:
9
Type:
Direct Drive
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Starters have new bronze sintered and oil-impregnated armature bushings
Features & Benefits - Bullet 4:
Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications
Features & Benefits - Bullet 3:
Solenoid contacts are new with copper terminals and plated hardware
Features & Benefits - Bullet 1:
Remanufactured using consistent quality processes; not just rebuilt
Signs of Wear & Troubleshooting - Section 1 - Bull:
Starter will not engage
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bull:
Clunking/grinding noise when starting engine
FAQ - Answer 2:
Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Question 3:
Do I always need a starter shim?
FAQ - Question 1:
Is the solenoid included?
FAQ - Question 2:
Can I be assured that the unit will last, especially in extreme weather?
Signs of Wear & Troubleshooting - Section 1 - Head:
Indicators that there could be a problem with your vehicle's starter are:
FAQ - Answer 1:
Yes. It is included where the design of the starter requires a solenoid.
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Bullet 1:
Check electrical connections, making sure they are kept clean.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 2:
Make sure all connections to the battery are firmly attached and in good condition.
Item Level GTIN:
00707773623398
Good Maintenance Practices - Section 1 - Bullet 3:
Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 4:
It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
FAQ - Answer 3:
No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive make appropriate contact with the flywheel.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Signs of Wear & Troubleshooting - Section 2 - Bull:
Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bull:
Damage to flywheel
Signs of Wear & Troubleshooting - Section 2 - Bull:
Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bull:
Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Head:
Other vehicle parts that might cause related starter problems include:
Voltage:
12 VDC
Mounting Bolt Hole Quantity:
2
Solenoid Attached:
Yes
Family:
Delco
Power Rating (Kilowatts):
1.6
Power Rating (Horsepower):
2.145
Mounting Flange to Pinion End at Rest (Millimeter):
18.0
Starter Rotation:
Clockwise
Nose Cone Material:
Aluminum
Case Grounding:
Grounded Case
Mounting Shims Included:
No
Re Clockable Flange:
No
Country of Origin:
United States
Weight - Each (Gross Pounds):
13.70
Height - Each (Inch):
05.90
Length - Each (Inch):
12.90
Width - Each (Inch):
07.10



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top